Multiple Line Dial-Up; Hang Up The Phone; Call Transfer - ATCOM AT-620 User Manual

AT-620 User Manual
number.
C、Push soft button to save the number in telephone directory.

Multiple line dial-up

4、
AT620 IP phone supports 2 Sip lines. That means user can register on 2
different sip accounts simultaneity in the same IP phone. The User can choose
line1 or line2 to switch dial-up, System default Sip1 when dial-up.
IP Phone be called:
AT-620 maximum supports one incoming call when it is called, when the
second line calling, the LCD will show the incoming telephone number. The User
can press the "corresponding line key" indicated by LED flicker, or press soft
button "ANS" to receive the second line call, when two calls coming together,
press soft button "SWIT" to Switch.
Notice:
The phone must work with Call Waiting function when work for this feature.

Hang up the phone

5、
1) Headset hang up
When use handset mode calling, put back the handset to hang up.
2) Hands free hang up
When use hands free calling, press soft button "speaker phone" to hang up.
3) Earphone Hang up
When use Earphone calling, Press the soft button "headset" to hang up.
4) Hang up one line call
When 2 lines call simultaneous, press soft button "SWIT" to choose the line
which you want to hang up, then press soft button "#" to end the call. In the
mean time, it will automatic switch to another line and continue call.
Moreover, user can redial-up or accept the second call.
Notice:
Hang up with "#" is invalidation when only one line call.

Call Transfer

6、
Blind Transfer
User A.B.C, assume B is AT-620 IP phone
1) When A Calls B and B receives
2) B presses soft button "Xfer"
3) B dials C's number.
4) After dialing C, B Presses soft button "Bxfr" (or wait for a few seconds after
ATCOM TECHNOLOGY CO., LIMITED