Dial Peer - ATCOM AT-610 User Manual

AT-610 User Manual
4.5. 4.5.
4.5. 4.5.
Audio Audio Audio Audio Settings Settings Settings Settings
First Codec ： The fist preferential DSP codec:G.711A/u, G722, G.723,
�
G.726-32, G.729
� Second Codec：The second preferential DSP codec:G.711A/u, G722, G.723,
G.726-32, G.729
Third Codec ： The third preferential DSP codec:G.711A/u, G722, G.723,
�
G.726-32, G.729
� Forth Codec: The Forth preferential DSP codec:G.711A/u, G722, G.723,
G.726-32, G.729
�
Fifth Codec: The fifth preferential DSP codec:G.711A/u, G722, G.723,
G.726-32, G.729
� Sixth Codec: The sixth preferential DSP codec:G.711A/u, G722, G.723,
G.726-32, G.729
�
Input Volume：Specify Input (MIC) Volume grade.
� Output Volume：Specify Output (receiver) Volume grade.
� Hands free Volume：Specify Hands free Volume grade.
�
Ring Volume：Specify Ring Volume grade.
� G729 Payload Length：Set G729 Payload Length.
� Signal Standard：Select Signal Standard.
� G722 Timestamps: 160/20ms or 320/20ms is available.
� G723 Bit Rate: 5.3kb/s or 6.3kb/s is available.
�
Default Ring Type: Select signal standard.
�
VAD：Select it or not to enable or disable VAD. If enable VAD, G729 Payload
length could not be set over 20ms.
� Handdown Time: Set the time which the phone hang up automatically after
call ended when use handfree mode.
ATCOM TECHNOLOGY CO., LIMITED