Atpm Sys Dial_Time 1St_Digit_Wait Inter_Digit_Wait [Dial_Term_Digit]; Tel Commands; Tel Show Pcm_Gain_Level; Tel Show Port [Port#] - Planet VIP-000 User Manual

VIP User's Manual

atpm sys dial_time 1st_digit_wait inter_digit_wait [dial_term_digit]

Use the atpm sys command to set the time constraints for collection of dial digits.
Syntax description
dial_time
1st_digit_wait
inter_digit_wait
dial_term_digitr

7.12 Tel Commands

tel show pcm_gain_level

The tel show pcm_gain_level command to display the gain level setting of the PCM codec's re-
ceive channel.
Syntax Description
This command has no arguments or keywords

tel show port [port#]

The tel show port command displays the hook state of a telephony port.
Syntax Description
Number of the port.
port#
Default
If the port number is not specified, the CLI displays hook state of all telephony ports.

tel show ring_freq

The tel show ring_freq command to displays the frequency of the ring signal that VIP sends to
FXS ports..
Command Line Interface
The maximum time, in millisecond, allowed for entry of the entire
string of dial digits. At expiration, ATPM starts address lookup.
The maximum time, in millisecond, allowed between off-hook
and when the first dial digit is entered. At expiration, ATPM con-
siders address lookup to fail.
The maximum time allowed between entry of each digit after the
previous digit. At expiration, ATPM starts address lookup.
(Optional) End of the dial string is declared when the digit is en-
tered.
81