Table of Contents
Advertisement
2.4 Installation Procedures
1.
Connect the power supply to IKVM-8000.
2.
Connect a monitor to the VGA connector in LOCAL CONSOLE side.
3.
Connect a keyboard to the purple PS/2 connector in LOCAL CONSOLE side.
4.
Connect a mouse to the green PS/2 connector in LOCAL CONSOLE side.
5.
Use 3-to-1 cable to connect IKVM-8000 and PCs. In one end, it has just one
HDDB 15-pin male connector. Please plug it into the computer port on the
rear of IKVM-8000. The other end has three connectors (male type HDDB 15-
pin for PC video, male type Mini Din 6-pin for keyboard and male type Mini
Din 6-pin for mouse). Please plug these three connectors into the respective
ports of computer. If there is many PC need to connected, please repeat the
same produce to connect all of the PCs.
6.
Connect the Type-A connector of USB cable to the USB port of the host
system and Type-B connector to IKVM-8000 USB port, while using remote
mass storage control. (Option).
5
Advertisement
Table of Contents
