Initial Configuration; Default Settings; Configuration Via Setup Utility - Planet IKVM-8000 User Manual

8-port ip kvm
Hide thumbs Also See for IKVM-8000:
Table of Contents

Advertisement

Chapter 3

Initial Configuration

3.1 Default Settings

The communication interfaces of IKVM-8000 are all based on TCP/IP. It comes
with the default settings as below.
IP auto configuration
IP-Address
Net-mask
Default-Gateway
Super user name
Super user password

3.2 Configuration via Setup Utility

By default, the IKVM-8000 will obtain its IP address from a DHCP server in the
network. If a DHCP server is found, it may provide a valid IP address, gateway
address and net mask. Before you connect IKVM-8000 to your local network,
please make sure the corresponding configuration of your DHCP server is com-
pleted. It is recommended to reserve a fixed IP assignment to the MAC address of
the IKVM-8000. You can find the MAC address labeled on the bottom side of the
metal housing.
If this initial configuration does not meet your local requirements, use the setup tool
to adjust the values to your needs. The setup tool can be found on the CD-ROM
delivered with this package. You can follow the procedure described below.
1. Connect the IKVM-8000 to the same network as your administrative PC, or you
can use an USB cable (type A to type B) to connect administrative PC and
IKVM-8000 directly. The USB connectivity only supported in windows 2000/XP
and server 2003 and the response time of USB connection would be longer than
LAN connection.
Parameter
Value
DHCP
192.168.1.1 (disabled)
255.255.255.0
none
super
pass
3
11

Advertisement

Table of Contents
loading

Table of Contents