Host Name; Default; Connection Mode - Planet GRT-101 User Manual

PLANET Technology Corp. GRT-101 User's Manual
----------------------------------------------------------
Command: setup dns_proxy <IP> [IP] [IP]
Message: Please input the following information.
DNS server 1 (ENTER for default) <168.95.1.1>: 10.0.10.1
DNS server 2: 10.10.10.1
DNS server 3:
----------------------------------------------------------

3.8.10 Host name

Enter local host name via hostname command. Move cursor " >> " to host-
name and press enter.
-------------------------------------------------
Command: setup hostname <name>
Message: Please input the following information.
Local hostname (ENTER for default) <SOHO>: test
-------------------------------------------------

3.8.11 Default

If you want to restore factory default, first move the cursor " >> " to default and
then press enter.
---------------------------------------------------------------------
Command: setup default <name>
Message: Please input the following information.
Are you sure? (Y/N): y
---------------------------------------------------------------------

3.9 Connection Mode

GRT-101 supports two connection modes: bridging and routing. Currently, it
comes pre-configured with routing mode. Note that, routing mode and bridging
mode cannot be used simultaneously.
To let GRT-101 operate in bridging mode, type:
admin# setup mode bridge
To save changes enter:
admin# write
To enable your changes, reboot the system:
admin# reboot
- - 43