Error Messages - Pioneer DVH-P6050UB Operational Manual

Appendix
Additional Information
Problems during iPod playback
Symptom
iPod doesn't operate correctly.
Problems during multi-channel processor connection
Symptom
No sounds are heard.
The volume level will not rise.
Even if multi-channel audio is
selected, 2-channel audio is out-
put.

Error messages

When you contact your dealer or your nearest Pioneer Service Center, be sure to have the error
message recorded.
Built-in DVD player
Message
ERROR 02-XX
HEAT (THERMAL PROTECTION
IN MOTION)
NON-PLAY (NON-PLAYABLE
DISC)
PROTECT (PROTECTED DISC)
REGION ERROR (DIFFERENT
REGION DISC)
SKIPPED
78
En
Cause
Cables are incorrectly connected.
The iPod version is old.
Cause
Optical cables are not connected
correctly.
Digital output setting is set to LINE-
AR PCM.
Cause
Dirty disc
Scratched disc
The disc is loaded upside down
The temperature of this unit is out-
side the normal operating range
This type of disc cannot be played
by this unit
The inserted disc does not contain
any files that can be played back
All the files on the inserted disc are
secured by DRM
The disc does not have the same re-
gion number as this unit
The inserted disc contains WMA
files that are protected by DRM
Action
Disconnect the cable from iPod. Once iPod
main menu is displayed, connect the cable
again.
Reset the iPod.
Update the iPod version.
Action (See)
Connect the cables correctly.
Normally, set the digital output setting to
STREAM. (Page 47)
Action
Clean disc.
Replace disc.
Check that the disc is loaded correctly.
Wait until the unit's temperature returns to
within normal operating limits.
Replace the disc with one this unit can play.
Replace disc.
Replace disc.
Replace the DVD video with one bearing the
correct region number.
Replace disc.