Using Compression; Using Disc Title Functions; Selecting The Play Mode - Pioneer DVH-P6050UB Operational Manual

Section
02 Operating this unit

Using compression

Using the COMP (compression) function let
you adjust the sound quality of disc.
% Press COMP repeatedly to select the de-
sired setting.
OFF—COMP1—COMP2
Note
You can also select setting in the menu that ap-
pears by using MULTI-CONTROL.

Using disc title functions

You can input CD titles and display the title.
The next time you insert a CD for which you
have entered a title, the title of that CD is dis-
played.
! This function is available for CD.
Entering disc titles
Use the disc title input feature to store up to
48 CD titles in the unit. Each title can be up to
10 characters long.
1 Play the CD that you want to enter a
title for.
2 Use MULTI-CONTROL to select
TITLE INPUT in the function menu.
Refer to Introduction to advanced operations
on page 27.
3 Push MULTI-CONTROL up or down to
select a letter of the alphabet.
4 Push MULTI-CONTROL left or right to
move the cursor to the previous or next
character position.
30
En
5 Move the cursor to the last position by
pushing MULTI-CONTROL right after enter-
ing the title.
When you push MULTI-CONTROL right one
more time, the entered title is stored in mem-
ory.
6 Press BAND to return to the ordinary
display.
Notes
! Titles remain in memory, even after the disc is
removed from the unit, and are recalled when
the disc is reinserted.
! After data for 48 discs are stored in the mem-
ory, data for a new disc overwrites the oldest
one.
! If you connect a multi-CD player, you can
input disc titles for up to 100 discs.
! When a multi-CD player that does not support
disc title functions is connected, you cannot
enter disc titles in this unit.

Selecting the play mode

You have two methods for playing DVD-VR
disc; ORIGINAL (original) and PLAYLIST (play-
list).
! Titles created with DVD recorders are
called original. Based on original, rear-
ranged titles are called playlist. Playlists
are created on DVD-R/RW discs.
! This function is available for DVD-VR.
1 Use MULTI-CONTROL to select the play-
list mode in the function menu.
Refer to Introduction to advanced operations
on page 27.
2 Press MULTI-CONTROL to switch the
play mode.
If the play mode is changed, playback starts
from the beginning of the selected play mode.