Other Functions; Turning The Clock Display On Or Off; Switching The Display Indication And Button Illumination - Pioneer DVH-P6050UB Operational Manual

Section
02 Operating this unit
! SLA (source level adjustment) setting (refer
to Adjusting source levels on page 67)
! Dynamic range control (refer to Using the
dynamic range control on page 67)
! Direct control setting (refer to Using the di-
rect control on page 67)
! Down-mix setting (refer to Using the down-
mix function on page 67)
1 Use MULTI-CONTROL to select
AUDIO RESET.
Refer to Adjusting initial settings on page 48.
2 Press MULTI-CONTROL to display OK.
# To cancel resetting the audio functions, press
BAND.
3 Push MULTI-CONTROL right to display
REALLY?.
# To cancel resetting the audio functions, press
BAND.
4 Press MULTI-CONTROL to reset audio
functions.
COMPLETE appears in the display.
52
En

Other Functions

Turning the clock display on or off

You can turn the clock display on or off.
% Press CLOCK to turn the clock display
on or off.
Each press of CLOCK turns the clock display
on or off.
# The clock display disappears temporarily
when you perform other operations, but the clock
display appears again after 25 seconds.
Note
Even when the sources are off, the clock display
appears on the display. Pressing CLOCK turns
the clock display on or off.
Switching the display indication
and button illumination
Display indication and button illumination can
be switched on or off.
% Press and hold DISP OFF.
Pressing and holding DISP OFF switches the
display indication and button illumination on
or off.
# While the display indication is turned off,
CLOCK/DISP OFF button lights up.
# Even if the display indication is turned off, op-
eration can be conducted. If operation is con-
ducted while the display indication is off, display
will light up for a few seconds and then turn off
again.