Warranty Information; Warranty Statement; Radio And Tv Interference - Patton electronics 1200 User Manual

1.0 WARRANTY INFORMATION

Patton Electronics warrants all Model 1200/1201 components to be
free from defects, and will—at our option—repair or replace the product
should it fail within one year from the first date of shipment.

1.1 WARRANTY STATEMENT

Patton Electronics warrants all Model 2701RC Series components to
be free from defects, and will—at our option—repair or replace the prod-
uct should it fail within one year from the first date of shipment. This war-
ranty is limited to defects in workmanship or materials, and does not
cover customer damage, abuse, or unauthorized modification. This prod-
uct contains no serviceable parts; therefore the user shall not attempt to
modify the unit in any way. If this product fails or does not perform as
warranted, your sole recourse shall be repair or replacement as
described above. Under no condition shall Patton Electronics be liable
for any damages incurred by the use of this product. These damages
include, but are not limited to, the following: lost profits, lost savings and
incidental or consequential damages arising from the use of or inability to
use this product. Patton Electronics specifically disclaims all other war-
ranties, expressed or implied, and the installation or use of this product
shall be deemed an acceptance of these terms by the user. In the event
the user detects intermittent or continuous product malfunction due to
nearby high power transmitting radio frequency equipment, the user is
strongly advised to use only data cables with an external outer shield
bonded to a metal or metalized connector.

1.2 RADIO AND TV INTERFERENCE

The Model 1200/1201 generates and uses radio frequency energy, and if
not installed and used properly-that is, in strict accordance with the man-
ufacturer's instructions-may cause interference to radio and television
reception. The Model 1200/1201 has been tested and found to comply
with the limits for a Class A computing device in accordance with specifi-
cations in Subpart B of Part 15 of FCC rules, which are designed to pro-
vide reasonable protection from such interference in a commercial
installation. However, there is no guarantee that interference will not
occur in a particular installation. If the Model 1200/1201 does cause
interference to radio or television reception, which can be determined by
disconnecting the unit , the user is encouraged to try to correct the inter-
ference by one or more of the following measures: moving the computing
equipment away from the receiver, re-orienting the receiving antenna
and/or plugging the receiving equipment into a different AC outlet (such
that the computing equipment and receiver are on different branches).
3