Configuring The Environet; Environet Model 2172 - Patton electronics EnviroNET 2100 Series User Manual

EnviroNET User Manual
Configuring the EnviroNET
You can configure the EnviroNET via the dip switches on the PC board (except for the 2156 and 2157 mod-
els). The following CopperLink models are available with the EnviroNET Ethernet Extender series:
•

"EnviroNET Model 2172"

• "EnviroNET Model 2168"
• "Other Models" on page 30

EnviroNET Model 2172

The EnviroNET Model 2172 has eight DIP switches for configuring the EnviroNET for a wide variety of
applications. This section describes switch locations and explains the different configurations.
Figure 9 shows the orientation of the DIP switches in the On and Off positions.

Configuring the EnviroNET

on page 23
on page 27
S1
POWER ONE
BLP-30
ON ON
1 2 3 4 1 2 3 4 5 6 7 8 5 6 7 8
Switch toggle
Push toggle up
for ON position
Push toggle
OFF position
Figure 9. DIP switch orientation
3 • Configuring the EnviroNET
S1
ON
down for
1 2 3 4
5 6 7 8
23