Configuring Dip Switch S2 - Patton electronics EnviroNET 2100 Series User Manual

EnviroNET User Manual
Configuring DIP Switch S2
DIP switch S2 is where you configure the line rate, symmetric or asymmetric, Ethernet, and Ethernet Shut-
down. Table 3 summarizes the default positions of DIP switches S2-1 through S2-8. Detailed descriptions of
each switch follow the table.
EnviroNET Model 2172
Table 3. S2 Summary
Position
S2-1 Symmetric/Asymmetric
S2-2 Line Rate
S2-3 Line Rate
S2-4 Ethernet configuration
S2-5 Ethernet configuration
S2-6 Ethernet configuration
S2-7 Ethernet Shutdown Enable
S2-8 Remote Configuration
S2
Switch toggle
Push toggle up
ON
for ON position
Push toggle
down for
1 2 3 4
OFF position
Line Rate
Symmetric Operation
Asymmetric Operation
Figure 10. EnviroNET 2172 Dip Switch Settings
3 • Configuring the EnviroNET
Description
5 6 7 8
Ethernet
Shutdown
Remote
Ethernet
Configuration
Configuration
24