Table of Contents
Advertisement
4.0 Configuring the EnviroNET
You can configure the EnviroNET via the dip switches on the PC board (except for the 2156 and 2157 models,
which require no user configuration).
4.1 EnviroNET Model 2172
EnviroNET Model 2172 uses DIP switch S2 to configure the line rate, symmetric or asymmetric, Ethernet, and
Ethernet Shutdown. Table 2 shows a summary of each switch.
Switch 1: Symmetric/Asymmetric Operation
To configure the unit for symmetric or asymmetric operation, push the first toggle switch up or down.
Refer to Table 3 for settings.
EnviroNET Quick Start Guide
Dip Switch
ON
ON
1 2 3 4
1 2 3 4
5 6 7 8
5 6 7 8
Table 2.
Position
S2-1
Symmetric/Asymmetric
S2-2
Line Rate
S2-3
Line Rate
S2-4
Ethernet configuration
S2-5
Ethernet configuration
S2-6
Ethernet configuration
S2-7
Ethernet Shutdown Enable
S2-8
Remote Configuration
Symmetric/Asymmetric Operation
Table 3.
S2-1
ON
Symmetric Operation
OFF
Asymmetric Operation
POWER ONE
BLP-30
S2 Summary
Description
Setting
5
Advertisement
Table of Contents
