A Compliance; Compliance; Emc Compliance; Safety Compliance - Patton electronics EnviroNET 2100 Series User Manual

Hide thumbs Also See for EnviroNET 2100 Series:
Table of Contents

Advertisement

EnviroNET User Manual

Compliance

EMC Compliance:

FCC Part 15, Class A
EN55022, Class A
EN61000-6-2

Safety Compliance:

UL60950-1/CSA C22.2 No. 60950-1
IEC/EN 60950-1
AS/NZS 60950-1

PSTN Regulatory Compliance:

Note
This device is NOT intended nor approved for connection to the PSTN.
It is intended only for direct connection to customer premise equipment.

Radio and TV Interference (FCC Part 15)

This equipment generates and uses radio frequency energy, and if not installed and used properly—that is, in
strict accordance with the manufacturer's instructions—may cause interference to radio and television recep-
tion. This equipment has been tested and found to comply with the limits for a Class A computing device in
accordance with the specifications in Subpart B of Part 15 of FCC rules, which are designed to provide reason-
able protection from such interference in a commercial installation. However, there is no guarantee that inter-
ference will not occur in a particular installation. If the equipment causes interference to radio or television
reception, which can be determined by disconnecting the cables, try to correct the interference by one or more
of the following measures: moving the computing equipment away from the receiver, re-orienting the receiving
antenna, and/or plugging the receiving equipment into a different AC outlet (such that the computing equip-
ment and receiver are on different branches).

CE Declaration of Conformity

We certify that the apparatus identified in this document conforms to the requirements of Council Directive
89/336/EEC, as amended by Directives 92/31/EEC and 93/68/EEC on the approximation of the laws of the
member states relating to electromagnetic compatibility; and Council Directive 73/23/EEC, as amended by
Directive 93/68/EEC, on the approximation of the laws of the member states relating to electrical equipment
designed for use within certain voltage limits.
The safety advice in the documentation accompanying this product shall be obeyed. The conformity to the
above directive is indicated by the CE sign on the device
Compliance
A • Compliance
38

Advertisement

Table of Contents
loading

Table of Contents