Patton electronics 3096RC Getting Started Manual page 53

Model 3096RC T-DAC Getting Started Guide
Example 2
Connect an E1 line, (WAN) Port 2, timeslots 1 - 31, to another E1 line, (WAN) Port 3, timeslots 1 - 31.
Solution:
1. Under Dev Type A, select t1-e1(1).
2. Under Dev Num A, select port2(2).
3. Under Dev Slots A, enter 1 - 31.
4. Under Dev Type B, select t1-e1(1).
5. Under Dev Num B, select port3(3).
6. Under Dev Slots B, enter 1 - 31.
7. Click the
Submit Query
You have completed the configuration for example 2.
Example 3
Connect two G.SHDSL modems together - G.SHDSL modem #15, time slots 1 - 32 (for a DTE data rate of 2.048
Mbps) to G.SHDSL modem #16, time slots 1 - 32.
Solution:
1. Under Dev Type A, select G.SHDSL(4).
2. Under Dev Num A, select port15(15).
3. Under Dev Slots A, enter 1 - 32.
4. Under Dev Type B, select G.SHDSL(3).
5. Under Dev Num B, select port16(16).
6. Under Dev Slots B, enter 1 - 32.
7. Click the
Submit Query
Note
8. Click the DSL hyperlink on the 3096RC Configuration Menu.
9. On the Configuration/information pane, click on the number 15 under the column titled Port # to open
the
G.SHDSL Port 15 Details
10. Click the
Change Config
11. Near the bottom of the pane, change Payload Rate to r2048(32) and click the "Submit" button. You will
automatically return to the G.SHDSL Port Information page.
12. Click the DSL hyperlink on the 3096RC Configuration Menu.
13. Scroll down to port 16.
Using a browser to complete Model 3096RC configuration
button
button.
At this point the DS0 channel mapping is completed. Now we need
to configure the DTE data rate of the G.SHDSL modem.
page.
button.
3 • Configuring the T-DAC for operation
53