Model 3096RC T-DAC Getting Started Guide
•
Example 2: Connecting an E1 WAN port to another E1 WAN port.
•
Example 3: Connect a G.SHDSL modems port to another G.SHDSL modem port.
Example 1
Connect G.SHDSL modem, Port 3 (referring to modem #3), time slots 1 - 31, to an E1 line on (WAN) Port 1, time
slots 1 - 31.
Solution:
1. Under Dev Type A, select G.SHDSL(3).
2. Under Dev Num A, select port3(3).
3. Under Dev Slots A, enter 1 - 31.
4. Under Dev Type B, select t1-e1(1).
5. Under Dev Num B, select port1(1).
6. Under Dev Slots B, enter 1 - 31.
7. Click the
Submit Query
Note
Using a browser to complete Model 3096RC configuration
button.
At this point the DS0 channel mapping is completed. Now is time to
configure the DTE data rate of the G.SHDSL modem, refer to sec-
tion
"Activating the G.SHDSL ports"
3 • Configuring the T-DAC for operation
on page 55.
50