Ethernet; Typical Ethernet Straight-Through Cable Diagram For 10/100Base-T; Typical Ethernet Straight-Through Cable Diagram For 1000Base-T - Patton electronics IpLink 2888 Getting Started Manual

IpLink 2888 Getting Started Guide

Ethernet

Ethernet devices (10Base-T/100Base-T/1000Base-T) are connected to the IpLink over a cable with RJ-45
plugs. All Ethernet ports on the IpLink 2888 are Auto-MDX use any straight or crossover cable to connect to
hubs, switches, PCs or other devices.
CAUTION
RJ-45, male
Figure 13. Typical Ethernet straight-through cable diagram for 10/100Base-T
RJ-45, male
Figure 14. Typical Ethernet straight-through cable diagram for 1000Base-T

Ethernet

The interconnecting cables shall be acceptable for external use
and shall be rated for the proper application with respect to volt-
age, current, anticipated temperature, flammability, and
mechanical serviceability.
1
2
3
6
1
2
3
6
4
5
7
8
Straight-through cable
Note: Other pins are not used.
C • Cabling
Hub
RJ-45, male
1
2
3
6
RJ-45, male
1
2
3
6
4
5
7
8
43