Safety When Working With Electricity - Patton electronics IpLink 2888 Getting Started Manual

IpLink 2888 Getting Started Guide

Safety when working with electricity

WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
WARNING
The IPLink contains no user serviceable parts. The equipment shall be returned
to Patton Electronics for repairs, or repaired by qualified service personnel.
Mains Voltage: Line voltages are present when the power cord is connected.
The mains outlet shall be within 10 feet (3 meters) of the device, shall be
easily accessible, and protected by a circuit breaker.
For AC powered units, ensure that the power cable used meets all applicable
standards for the country in which it is to be installed, and that it is connected
to a wall outlet which has earth ground.
Hazardous network voltages are present in WAN ports regardless of whether
power to the IpLink is ON or OFF. To avoid electric shock, use caution when
near WAN ports. When detaching cables, detach the end away from the IpLink
first.
Do not work on the system or connect or disconnect cables during periods of
lightning activity.
For units with an external power adapter, the adapter shall be a listed Lim-
ited Power Source.
Ensure that the power cable shipped with this device meets all applicable
standards for the country in which it is to be installed. If it is not, refer to
chapter Chapter 5, "Contacting Patton for assistance"
help in replacing it with a compliant cable.
In accordance with the requirements of council directive 2002/
96/EC on Waste of Electrical and Electronic Equipment (WEEE),
ensure that at end-of-life you separate this product from other
waste and scrap and deliver to the WEEE collection system in
your country for recycling.
on page 32 for
11