Led Display - Patton electronics 2616RC Getting Started Manual

T1/e1 tdm-digital access concentrator (t-dac)
Hide thumbs Also See for 2616RC:
Table of Contents

Advertisement

Model 2616RC T-DAC Getting Started Guide

LED display

Front panel LEDs
(figure 3
LAN port, power, and the alarms. The LEDs are described in
LED
Color Status
POWER
Green
CPU FAIL
Red
ALARM
Yellow On solid A minor alarm condition has been detected.
SYSTEM
Green
ETHERNET
Green
CLK SOURCE
Green
CLK ERROR
Yellow On solid Master Clock source has been lost and the 2616RC is using the secondary source
TEST MODE
Green
T1/E1
Green
CONNECTION
(LEDs 1–16)
READY
Blue
Hardware overview
on page 17) display the status of the WAN ports, the T1/E1 ports, the Ethernet
Table 3. LED definitions
On solid Power is being applied. No action recommended.
Flashing The 2616RC has detected a power failure on a power bus.
Off
No input power is being applied.
On solid CPU is unable to load the software from FLASH to RAM for operation.
Off
The CPU is operating normally.
Flashing A major alarm condition has been detected.
Off
The Model 2616RC is operating normally.
Flashing The Model 2616RC is operating normally.
Off
The Model 2616RC is not functioning properly.
On solid Link status is nominal for the Ethernet port. No action recommended.
Off
A valid link has not been detected.
On solid The 2616RC is set as the Master Clock source.
Flashing The 2616RC is set as the secondary clock source.
Off
The 2616RC is set as the slave, getting its clock from the H.110 Bus.
for its clock.
Flashing Master Clock source and the Secondary Clock source have been lost and the 2616RC
is using its internal crystal for its clock.
Off
No clock errors currently detected.
On solid One or more T1/E1 ports or T1/E1 ports is in test mode.
Flashing One or more of the T1/E1 ports or the T1/E1 ports is in test mode and errors have
been received.
Off
None of the T1/E1 ports is operating in test mode.
On solid The port is activated, linked, and operating normally.
Flashing The port is activated but not linked or in an error state.
On
Card ready for removal from Patton ForeFront chassis.
Off
Card not ready for removal from Patton ForeFront chassis.
table
3.
Meaning
1 • Introduction
18

Advertisement

Table of Contents
loading

Table of Contents