Home Page Window Panes; Operator Actions Buttons - Patton electronics 2616RC Getting Started Manual

Model 2616RC T-DAC Getting Started Guide
From the Home page, the following actions can be performed:
• Record Current Configuration—clicking on this button (see
from volatile DRAM memory to FLASH memory. Once the configuration is saved into FLASH memory,
the configuration will not be lost even if the power is cycled on the 2616RC. Initially, changes made to the
2616RC configuration are stored in volatile DRAM, enabling the user to set the box up with a working
configuration before committing it to storage in FLASH. When you select Record Current Configuration,
the 2616RC stores your changes to FLASH memory.
Note
Using a browser to complete Model 2616RC configuration
Figure 25. HOME page window panes
Figure 26. Operator Actions buttons
If you want to save the configuration changes that you have made,
you must click on
Record Current Configuration
figuration changes will be lost if the power to the Model 2616RC is
turned off.
3 • Configuring the T-DAC for operation
figure 26) saves the current configuration
, otherwise all con-
39