Panasonic EASA-PHONE KX-T123211D Installation Manual page 96

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . until the desired
mode appears
[
Outgoing : On __ to print outgoing calls __ default
Outgoing : Off __ to stop printing
, . . . .
until the desired mode appears
[
Incoming : On __ to print incoming calls __ default
Incoming : Off __ to stop printing
00ti00~0~
25 NEXT SELECT MEMORY NEXT SELECT MEMORY END
Description
4.
It is possible to print outgoing calls or
.
incoming calls or both.
5.
Programming
1.
2.
3.
Dial (25).
" Duration Log" will be displayed.
Press the NEXT button.
" Outgoing : On" will be displayed and the
" On" will blink.
6.
7.
Press the SELECT button to alternate between
the " On" and" Off" to select the desired
mode.
8.
-
Press the MEMORY button.
The LCD will stop blinking.
Press the NEXT button.
" Incoming : On" will be displayed and the
" On" will blink.
Press the SELECT button to alternate between
" On" and " Off" to select the desired mode.
Press the MEMORY button.
The LCD will stop blinking.
To return to the initial program mode, press
the END button.
Programming Table
See page 7-8.
,.............................
until the desired mode appears
I
I
Description
'
Enables programming to print out secret dialing
numbers, even though these secret numbers are
not displayed on the LCD during speed dialing
(" System Speed Dialing Entry" on page 3-5) or
one-touch dialing (on page 4-4) are used.
Programming
1.
Dial (26)
" Secret Printing" will be displayed.
2. Press the NEXT button.
" No Printing" will be displayed and blink.
3. Press the SELECT button to:alternate
between " No Printing" ' and " Printing" to
select the desired mode.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press
the END button.
Programming Table:
See page 7-a.
3-36