Panasonic EASA-PHONE KX-T123211D Installation Manual page 200

To Change into Other CO Button
To Assign into Trunk Group Access Button
l Be sure the handset is in the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
l Be sure the handset is in the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephone to "PROGRAM". , .
Press CO
which you
want to
change into
different
CO button
Dial " 0" Dial Press
CO number
MEMORY
which is
set newly
(01 through 12)
l After programming all CO buttons, return
the MEMORY switch to the "SET" position.
Press CO
Dial " W Dial
Press
which you ;;;;Ll:ouP
MEMORY
want to
change into
(1 through 8)
trunk group
button
l After programming all CO buttons, return
the MEMORY switch to the "SET" position.
Description
Allows each CO button to change into CO
number which is different from printed CO
number.
Operation
0
0
1.
2.
3.
Be sure the handset is in the cradle and the
SP-PHONE button is off.
Set the MEMORY switch of the proprietary
telephone to "PROGRAM".
Press CO button which you want to change into
different CO number.
When pressing CO 1 button,
" CO-01" will be displayed.
Dial (0).
" CO- " will be displayed.
Dial the CO number which is set newly (01
through 12).
When dialing (02),
" CO-02" will be displayed.
Description
Allows each CO button to change into
the trunk group access number (81 through 88).
Operation
l Be sure the handset is in the cradle and the
SP-PHONE button is off.
l Set the MEMORY switch of the proprietary
telephone to 66~~~~~~~' 9.
1. Press the CO button which you want to change
into trunk group access number.
2. Dial (I#).
3. Dial the trunk group number (1 through 8).
4. Press the MEMORY button.
l After programming all CQ.buttons, return the
MEMORY switch to the "SET' : position.
4. Press the MEMORY button.
o After programming all CO buttons, return the
MEMORY switch to the "SET" position.
4-57