Panasonic EASA-PHONE KX-T123211D Installation Manual page 107

until the desired mode appears
Dump Start . . . . . . . . - - default
Dump Stop
SWR Data Clear
.
I
Description
Programming
Dial (34).
KX-Tl23211 automatically records the working
state of System.
1.
" Working Report" will be displayed.
The recording starts when the System Working
Report is cleared.
Programming this feature enables to clear the
record or output the records of working state to
SMDR.
2.
3.
Press the NEXT button.
" Dump Start" will be displayed and blink.
Repeat pressing the SELECT button until the
desired mode (Dump Stan, Dump Stop or
SWR Data Clear) is displayed.
Press the MEMORY button.
The LCD will stop blinking.
Contents Recorded
4.
1. Date of record
0 The date and time cleared.
0 The date and time printed out.
5 " . Repeat steps 3 and 4, to select another
mode.
2. Incoming calls
The number of incoming calls
The number of answered of incoming calls
The number of unanswered of incoming calls
The ratio of the answered calls to the
6. To return to the initial program mode, press the
END button.
Programming Table
incoming calls
See page 7-11.
Number of answered calls
x 100 (%)
Number of incoming calls
The average time from receipt of call to
answer of the incoming and answered calls
The average duration time of talk of the
answered calls
3. Outgoing calls
l
The number of access requested
0 The number of access succeeded
0 The number of access failed
0 The ratio of access succeeded
Number of access succeeded
x 100 (%)
Number of access requested
0 The average duration of the dialed calls.
3 - 47