Panasonic EASA-PHONE KX-T123211D Installation Manual page 78

until the desired type appears
type A . . . . . . . . . . . . . . . . . default
type B
type C
.
I
Description
Area types specific to local
There are three area types
telephone numbers can be selected for toll restrictions.
available as shown below.
Type A :
Type B :
Type C :
Toll calls (long distance)
Area code Exchange code
Local calls
..................................
Exchange code
Subscriber number
Toll calls (long distance)
........... Apa ,.ode
Subscriber number
Local calls
................................. Exchange code
Subscriber number
Toll calls (long distance)
..........
1 - Areacode
Local calls (charge)
....................
Local calls
................................ Exchange code
Subscriber number
" Service Class Assignment of Toll Restriction" (on page 3-67) should be programmed.
When area type 6 or C is selected, the selected Exchange Code must be entered using the " Allowable Exchange
Code Selection" (on page 3-21) programming.
Programming
1. Dial (10).
" Area Type" will be displayed.
Programming Table
See page 7-5.
2. Press the NEXT button.
" Area Type - A" will be displayed and the
" A" will blink.
3. Repeat pressing the SELECT button until
the desired type (A, B, C) is displayed.
4. Press the MEMORY button.
The LCD will stop blinking.
5. To return to the initial program mode, press the
END button.
3-18