Panasonic EASA-PHONE KX-T123211D Installation Manual page 215

While Having a conversation
(cont.)
Description
Description
Allows for a three party conference,
(2-outside/ 1 -inside) (1 -outside/2-inside) or
(34nside).
Call Waiting tones during a conversation
indicates there is a new incoming outside
call or Intercom call.
/
This feature has been set beforehand in
the exte nsion.
ODeration
.
\ I
ml hal \
Flash Dial 2nd
Consult
Flash
hookswitch
pafly
with 2nd hookswitch
leave 1st number
party
party on hold
Dial "3"
When the "Call on Hold for Standard
Telephone" on page 3-77 is placed in the
"Hold-2" mode, dial "20" after first flashing
of the hookswitch in addition to the above
procedure. If any number except "20" is
dialed, the first party will be disconnected.
To leave one caller on Hold and Talk to the
Other Caller
Flash 2nd party
hookswitch on hold 1 st
party in
consultation
Operation
Will hear
a call
waiting
tone
Flash
hookswitch
leave 1st
p;y on
Hang up Lift
handset
Consult with
new caller
while 1st
r;);;;y is on
l
If you use the hold button of a standard
telephone, the above-mentioned feature
will not function.
l
To terminate the original call and return
to the 2nd call, hang up and then lift the
handset. (You need not flash the
hookswitch.)
When the "Call on Hold for Standard
Telephone" on page 3-77 is placed in the
"Hold-2" mode, dial "20" after first flashing
of the hookswitch in addition to the above
procedure. If any number except "?$I" is
dialed, the first party will be,disconnected.
-
I
5-5