Operation Of A Standard Telephone; Making Calls - Panasonic EASA-PHONE KX-T123211D Installation Manual

OPERATION OF A STANDARD TELEPHONE
(rotary and touch tone phones)
- c
Making Calls
Description
Station to station dialing within the
KX-T123211 system.
Operation
Lift
handset
;z;ia;ension
(100 through 199)
Automatic Line Access
Description
Each extension can automatically select an
idle line within the CO (Central Office) line
enable to call.
Operation
Lift
handset
Dial " 9"
Wait for
Dial phone
C.O. dial tone number
Individual Trunk GrouD Access
Description
Each extension can automatically select an
idle CO line within the same trunk group.
Through programming, 12 CO lines can be
divided up to 8 groups. See the page
3-52.
Operation
handset
Dial phone
number
TUV
cl
8
Dial " 8" Dial trunk
Wait for
group
C.O. dial
number
tone
(1 through 8)
5-I
Description
There are 100 memory locations of system
speed dialing available.
Operation ,
Lift handset Dial " C' Dial speed
access code (00 through 99)
l
There is no need to access a CO line.
l A rotary phone will not function for
speed dialing
l Continuous use of speed dialing is
impossible.
Description
You can call the doorphone within the
KX-Tl23211 system.
ODeration
Doorphone 1
Lift handset
Dial " 311"
Doorphone 2
,~
Lift handset
Dial " 312"
0
You can not dial to doorphone from Off
Premise Extension (OPX).
0 Up to two doorphones (KX-T30865) can be
Description
You can call the operator within the
KX-T123211 system.
This feature is required to be set
beforehand in the KX-T123211. For
programming, see page 3-9.
Lift
Dial " 0"
Dial " 0"
handset
or " 1 "
o
In case one operator is programmed, you
have only to dial 0.