Panasonic EASA-PHONE KX-T123211D Installation Manual page 133

:......................-unti I the desired jack number (01 through 32) appears
............................. until the desired mode appears
Disable ..... ..-....defaul t (all 32 jack numbers)
Enable
I
AB=
El
: to assign the same on all 32 jack numbers
mm : on jack number 01
]~j~[ : on jack number 32
Description
" Call Forwarding To Outside Line" (on page
7. Repeat steps 4 to 6 to program the
4-29) enable for each extension.
assignment of the other jack numbers.
Programming
1.
2.
3.
4.
Dial (66).
" CO Forward" will be displayed.
Press the NEXT button.
" Jack NO ? + " will be displayed.
Press the NEXT button or dial the jack number
( 01 through 32 ).
" WI1 : Disable" will be displayed and " Disable"
-c_
jack number
will blink.
Press the SELECT button to alternate between
" Enable" and " Disable" to select the desired
mode.
5. Press the MEMORY button.
The LCD will stop blinking.
6. l To advance to the next jack number,
press the NEXT button.
l To return to the previous jack number,
press the PREV button.
l To go to the desired jack number,
press the SELECT button and then dial the
jack number.
8. To return to the initial program mode,
press the END button.
Programming Table
See page 7-27.
-
3-73