Plc Card; Slc Cards; Slc-M Card - Panasonic KX-T336 Installation Instructions Manual

9.00 PLC Card

Functions
PLC card (KX-T96172)
(1) PITS and DSS console interface. (8 circuits/
card)
Maximum loop resistance : 40 ohms
Power supply 1 : +3OV (supplied through
Power supply 2 : +15V (supplied through
(2) PITS (KX-T1232300,
interface with OHCA feature.
When a PITS with OHCA feature is connected
to a port, an OHCA piggy back card (KX-
T96136) should be mounted to its interface
circuit
Operation
LED indicator on the PLC card lights when the
system reset or PLC local reset occurs.
Technical Manuals Online! - http://www.tech-man.com
speech path, and with
current limitation circuit).
data line).

10.00 SLC Cards

10.01 SLC Card
Functions
SLC card (KX-T96174)
(1) Standard SLT interface.
Maximum loop resistance : 600 ohms.
(including SLT)
Power supply : +3OV (with current limitation
circuit.)
2 DTMF receivers, dial pulse detector.
(2) Power Failure Transfer (PFT) by ports 1
through 8.
When power failure occurs, SLT Tip / Ring are
led by a PFT relay, but SLT PFT modular and
LCOT / GCOT modular should be connected
each other by connection cords in advance.
(3) Diagnostic transfer (DT) by each port.
Diagnostic relay is placed in Tip / Ring of each
port.
During diagnostic test, only one diagnostic
relay in the SLT of a system is activated.
Operation
LED indicator on the SLC card lights when
system reset or SLC local reset occurs.

10.02 SLC-M Card

Functions
SLC-M Card (KX-T96175)
1
Same as 10.01 SLC Card
(3)
(4) SLT with Message Waiting Lamp interface
Power supply to Message Waiting
Lamp: +80VDC (when 1 mA)
Operation
Same as 10.01 SLC Card
1 -E-6