Panasonic KX-T336 Installation Instructions Manual page 128

Description of Assigning items
1st through 12th Hundred Block
Extension
Conditions
"System-Numbering Plan" setting cannot be changed if 'System-Operation",
Numbering Plan is set to "Fixed 1" or "Fixed 2." If "Flex" is selected, this setting is
changeable.
When entedng "DG 1 n to "DG 2," the cursor does not advance nor return automati-
the -+ and
cally. Use
"Parameter Save OK?" will be displayed on this screen, if you attempt to exit this
screen without saving the data change you've made.
Different from other screens, "Parameter Save OK?" is not displayed on this screen
when you press the NEXT/PREV key.
Data storage is executed by the PF 4 (Memory) key or the PF 2 (End) key for all
screens at the same time. Logical check is also performed according to the follow-
ing logic:
Extension numbers and other PBX extension numbers are three or four.
digits and the leading one or two digits are assigned in "Numbering Plan"
s c r e e n s .
Feature numbers may be one, two, three or four digits.
Those numbers assigned in Numbering Plan screens cannot include the
same number assigned to other feature number as the part or whole of it.
For example, if the digit "2" is assigned to the feature number for Trunk
Group 01-08 Access" and another digits "21" is assigned for "Trunk Group
351" cannot be present at the same time.
It is possible to store '0" through "9;" "3~ ," "#," as the feature numbers.
However, if "So or "#" is included in the feature numbers, those features are not
accessed by the rotary telephone extensions.
1 st to 12th Hundred
Block Extension
Technical Manuals Online! - http://www.tech-man.com
Assigns the leading one or two digits for extension DN (Dire&y
Number). If the leading digit is not programmed, the DN assignment
is not possible.
Extension numbers cannot include " w " and "#."
SD-84
(70695)