Panasonic KX-T336 Installation Instructions Manual page 286

2.00 VUP command (Version-up)
Description
Used to initialize the RAM area of the newly
added system memory while keeping the current
settings intact.
This command is valid when one of the following
version of ROM is replaced with a new version of
ROM (version 1 LXX and above).
. V.6.5X,V.8.XX,V.S.XX,V.lO.XX
Command Format
OPE>VUP + old ROM Version No. (Vxxxx)* J
If your old ROM version is V.6.5X or lower, enter 11.6.50".
l
If your old ROM version is V.7.XX, enter "V.8.00".
Display Example
,
Are You Sure? (Y; Yes, Other: No) =
,
Conditions
After replacing an old version of ROM with a new
version of ROM (Version 12.xX or higher),
"Additional System Memory initialization" should
be done before programming the newly added
features. Then newly added system memory is
initialized by default values.
Note:
If you do not execute this operation after
l
replacing the ROM, the system malfunction may
occur.
Technical Manuals Online! - http://www.tech-man.com
.
15-G-3