i t e m
Assigning Items
N u m b e r
1 4
Pause Time
1 5
Hook Switch Flash Time
Conditions
The assigning items:Type, Incoming Mode (Day/Night), Destination
and Type and Number can be changed only when all the trunks belonging to the
trunk group are not in use. If any trunk is used, it is impossible to change.
Item
Number
Tenant
0 3
Incoming/Outgoing
0 4
Incoming Mode
0 5
Incoming Mode
0 6
(Night)
Dialing Plan
11
For the relation between trunk group/CO line setting and PITS
refer to Section 9-E-l .Ol Trunk Group (l/2)."
Technical Manuals Online! - http://www.tech-man.com
1 : 1.5s
2 : 2.5 s
3 : 3.5 s
4 : 4.5 s
0 : none
1 : 80ms
2 : 300 ms
3 : 600ms
4 : 900 ms
5 : 1200ms
If I*** m is displayed here, "Operation (OPR)"; Tenant Service is set to "N
(No)."
When "Incoming Only" is selected in the trunk group with DID, the following
items are assignable but they do not work at all in Incoming Only mode.
Disconnect Time
l
Pause Time
l
Hook Switch Flash Time
l
Max. Dial No. after EFA Signal
l
For further information, refer to "3. Other Conditions" on page 9-E-7.
Refer to Section 9-E-l -01 Trunk Group (l/2)."
If '2 (Fixed)" or 3 (Flexible)" is changed to another option, it cancels all the
settings of CO lines in "CO Line (COL)", Night Answer Point (Type: No.)
which belong to the trunk group.
If "2 (Fixed)" is changed to 3 (Flexible)" and vice versa, the Night Answer
Points are not canceled.
Refer to Section 9-E-l .Ol "Trunk Group (l/2)."
10-c-30
input Value
for the item
Continued
C L R