2. Carefully separate the touchpad module from the top cover.
Removing the Chipset Heat Sink
To remove the chipset heat sink, first remove the top cover (see
the following steps:
1. Remove the 2 screws securing the chipset heat sink to the main board.
Removing the WLAN Card
To remove the WLAN card, first remove the LCD module (see
perform the following steps:
1. Release with your fingers the side locks securing the WLAN card. As you release the locks,
the card will automatically pop up and stay in a 45º angle position.
Fig. 25 Location touchpad screws.
Fig. 26 Location chipset heat sink screws.
Packard Bell EasyNote L Disassembly Manual
Removing the Top
Cover), then perform
Removing the LCD
Module) and then
13