Wlan Card - Packard Bell EasyNote GN45 Disassembly Manual

77777

WLAN Card

To remove the WLAN card, first remove the battery (see Battery) and then perform the following steps:
1. Release the screws retaining the memory module slot cover (see step 1 in
2. Disconnect the wireless antenna cables (red circles on Fig. 9).
3. Remove the two screws securing the WLAN card (yellow circles on Fig. 9).
4. Lift the card from the main board.
Packard Bell EasyNote GN45 Disassembly Manual
Fig. 8 Removing the memory module.
Fig. 9 Removing the WLAN card.
7
Memory Module).