Advertisement
CVGF-SVN02B-E4
Installation:
Electrical
Interconnecting Wiring
Typical equipment room conduit
layouts with and without unit-
mounted starters are shown in
Figures 15 and 16, respectively.
Figure 16. Typical equipment room layout with unit-mounted, Wye-
Delta
Unit Control
Panel
Note: See Starter submittal drawing for location of incoming wiring to the starter.
IMPORTANT
Keep in mind that the
interconnecting wiring between
the starter panel, compressor
and UCP control panel is factory-
installed with unit-mounted
starters but must be field-
installed when a remote-
mounted starter is used.
Line Side Power
Conduits
Unit Mounted
Starter
59
Hide quick links:
Advertisement
