Port Config - TP-Link JetStream TL-SL3428 User Manual

The following entries are displayed on this screen:
Global Config

Voice VLAN:
VLAN ID:
Aging Time:

9.3.2 Port Config

Before the voice VLAN function is enabled, the parameters of the ports in the voice VLAN should
be configured on this page.
Choose the menu QoS→Voice VLAN→Port Config to load the following page.
Note:
To enable voice VLAN function for the LAG member port, please ensure its member state accords
with its port mode.
If a port is a member port of voice VLAN, changing its port mode to be "Auto" will make the port
leave the voice VLAN and will not join the voice VLAN automatically until it receives voice streams.
Select Enable/Disable Voice VLAN function.
Enter the VLAN ID of the voice VLAN.
Specifies the living time of the member port in auto mode after the
OUI address is aging out.
Figure 9-13 Port Config
121