TP-Link JetStream TL-SL3428 User Manual page 170

The following entries are displayed on this screen:
Port Config

Port Select:
Select:
Port:
Status:
Guest VLAN:
Control Mode:
Control Type:
Figure 11-21 Port Config
Click the Select button to quick-select the corresponding port
based on the port number you entered.
Select your desired port for configuration. It is multi-optional.
Displays the port number.
Select Enable/Disable the 802.1X authentication feature for the
port.
Select Enable/Disable the Guest VLAN feature for the port.
Specify the Control Mode for the port.

Auto: In this mode, the port will normally work only after
passing the 802.1X Authentication.

Force-Authorized: In this mode, the port can work normally
without passing the 802.1X Authentication.

Force-Unauthorized: In this mode, the port is forbidden
working for its fixed unauthorized status.
Specify the Control Type for the port.

MAC Based: Any client connected to the port should pass the
802.1X Authentication for access.

Port Based: All the clients connected to the port can access
the network on the condition that any one of the clients has
passed the 802.1X Authentication.
163