TP-Link JetStream TL-SL3428 User Manual page 70

PC B and Server B is in the same VLAN;

PCs in the two VLANs cannot communicate with each other.

Network Diagram

Configuration Procedure

Configure Switch A

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
Configure Switch B

Step Operation
1 Configure
Link Type of the
ports
2 Create VLAN10
3 Create VLAN20
Description
the Required. On VLAN→802.1Q VLAN→Port Config page, configure
the link type of Port 2, Port 3 and Port 4 as ACCESS, TRUNK and
ACCESS respectively
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 10, owning Port 2 and Port 3.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 20, owning Port 3 and Port 4.
Description
the Required. On VLAN→802.1Q VLAN→Port Config page, configure
the link type of Port 7, Port 6 and Port 8 as ACCESS, TRUNK and
ACCESS respectively.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 10, owning Port 6 and Port 8.
Required. On VLAN→802.1Q VLAN→VLAN Config page, create a
VLAN with its VLANID as 20, owning Port 6 and Port 7.
63