Table of Contents
Advertisement
Next Filter Set
To edit Filter Rule, click the Filter Rule index button to enter the Filter Rule setup page.
Check to enable the
Filter Rule
Comments
Index(1-15)
Direction
Source/Destination IP Click Edit to access into the following dialog to choose the
Vigor2955 User's Guide
Set the link to the next filter set to be executed after the current
filter run. Do not make a loop with many filter sets.
Check this box to enable the filter rule.
Enter filter set comments/description. Maximum length is 14-
character long.
Set PCs on LAN to work at certain time interval only. You may
choose up to 4 schedules out of the 15 schedules pre-defined in
Applications >> Schedule setup. The default setting of this filed is
blank and the function will always work.
Set the direction of packet flow (LAN->WAN/WAN->LAN). It is
for Data Filter only. For the Call Filter, this setting is not
available since Call Filter is only applied to outgoing traffic.
source/destination IP or IP ranges.
58
Advertisement
Table of Contents
