Table of Contents
Advertisement
To use Static or Dynamic IP as the accessing protocol of the internet, please choose
Internet Access from WAN menu. Then, select Static or Dynamic IP mode for WAN2.
The following web page will be shown.
Static or Dynamic IP
(DHCP Client)
Keep WAN
Connection
WAN Connection
Detection
MTU
RIP Protocol
Vigor2955 User's Guide
Click Enable for activating this function. If you click Disable,
this function will be closed and all the settings that you adjusted
in this page will be invalid.
Normally, this function is designed for Dynamic IP environments
because some ISPs will drop connections if there is no traffic
within certain periods of time. Check Enable PING to keep alive
box to activate this function.
PING to the IP - If you enable the PING function, please specify
the IP address for the system to PING it for keeping alive.
PING Interval - Enter the interval for the system to execute the
PING operation.
Such function allows you to verify whether network connection is
alive or not through ARP Detect or Ping Detect.
Mode – Choose ARP Detect or Ping Detect for the system to
execute for WAN detection.
Ping IP – If you choose Ping Detect as detection mode, you have
to type IP address in this field for pinging.
TTL (Time to Live) – Display value for your reference. TTL
value is set by telnet command.
Mean maximum transmission unit of one packet. The default value
is 1442.
Routing Information Protocol is abbreviated as RIP（RFC1058）
specifying how routers exchange routing tables information. Click
Enable RIP for activating this function.
28
Advertisement
Table of Contents
