Draytek Vigor2955 User Manual page 164

ACS Server
CPE Client
Periodic Inform Settings
STUN Settings
Vigor2955 User's Guide
Such data must be typed according to the ACS (
Configuration Server) you want to link. Please refer
to VigorACS user's manual for detailed information.
URL - Type the URL for VigorACS server.
If the connected CPE needs to be authenticated, please
set URL as the following and type username and
password for VigorACS server:
http://{IP address of
VigorACS}:8080/ACSServer/services/ACSServlet
If the connected CPE does not need to be authenticated
please set URL as the following:
http://{IP address of
VigorACS}:8080/ACSServer/services/UnAuthACSServ
let
Username/Password - Type username and password for
ACS Server for authentication. For example, if you want
to use such CPE with VigorACS, you can type as the
following:
Username: acs
Password: password
It is not necessary for you to type them. Such information
is useful for Auto Configuration Server.
Enable/Disable – Sometimes, port conflict might be
occurred. To solve such problem, you might want to
change port number for CPE. Please click Enable and
change the port number.
Disable – The system will not send inform message to
ACS server.
Enable – The system will send inform message to ACS
server periodically (with the time set in the box of
interval time).
The default setting is Enable. Please set interval
time or schedule time for the router to send
notification to CPE. Or click Disable to close the
mechanism of notification.
Disable – The system will not send connection request
binding message to STUN server.
Disable.
Enable –The system will send connection request
binding message to STUN server.
Server IP – Type the domain name or IP address of the
STUN server.
Server Port –Type the server port. The default setting is
3478.
Minimum Keep Alive Period – The default setting is 60
seconds. It determines the minimum period that the
STUN binding request must be sent by the CPE to
maintain the binding.
Maximum Keep Alive Period - It determines the
maximum period that the STUN binding request must be
sent by the CPE to maintain the binding.
154
Auto
The default setting is