Draytek Vigor2955 User Manual page 117

Profile Name
User Name
Password
Pre-Shared Key
Confirm Pre-Shared Key Type the pre-shared key again for confirmation.
Digital Signature (X.509) Check the box of Digital Signature to invoke this
Peer IP/VPN Client IP
Peer ID
Type a name for such profile. The length of the file is
limited to 10 characters.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
This field is used to authenticate for connection when you
select PPTP or L2TP with or without IPSec policy above.
For IPSec/L2TP IPSec authentication, you have to type a
pre-shared key.
function.
Peer ID – Select one predefined in the X.509 Peer ID
Profiles (set from VPN and Remote Access>>IPSec
Peer Identity). If you choose None, it means that you
will accept any peer regardless of its identity.
Local ID – Click Alternative Subject Name First to
make a specific field of digital signature to accept the
peer with matching value. The field can be IP Address,
Domain, or E-mail Address. Or click Subject Name
First to make a specific field of digital signature to
accept the peer with matching value. The field includes
Country (C), State (ST), Location (L), Organization (O),
Organization Unit (OU), Common Name (CN), and
Email (E). You have to configure one certificate at least
previously in Certificate Management >> Local
Certificate. Otherwise, the setting you choose here will
not be effective.
Type the WAN IP address or VPN client IP address for
the remote client.
Type the ID name for the remote client.
107
Vigor2955 User's Guide