Table of Contents
Advertisement
Protocol
Public IP
Private IP
Mask
Status
Click the index number link to open the configuration page.
Enable
Protocol
WAN Interface
WAN IP
Display the protocol used for this address mapping.
Display the public IP address selected for this entry, e.g.,
86.123.123.2.
Display the private IP set for this address mapping, e.g.,
192.168.1.10
Display the subnet mask selected fro this address mapping.
Display the status for the entry, enable or disable.
Check to enable this entry.
Specify the transport layer protocol. It could be TCP, UDP, or
ALL for selection.
Specify the WAN interface that will be used for this entry.
Select an IP address (the selections provided here are set in IP
Alias List of Network >>WAN interface). Local host can use this
IP to connect to Internet.
53
Vigor2955 User's Guide
Advertisement
Table of Contents
