Table of Contents
Advertisement
WAN IP Network
Settings
DNS Server IP
Address
D
e
t
a
i
l
s
P
a
g
e
f
o
r
P
D
e
t
a
i
l
s
P
a
g
e
f
o
r
P
To use PPTP/L2TP as the accessing protocol of the internet, please choose Internet Access
from WAN menu. Then, select PPTP/L2TP mode for WAN2/WAN2. The following web
page will be shown.
This group allows you to obtain an IP address automatically and
allows you type in IP address manually.
WAN IP Alias - If you have multiple public IP addresses and
would like to utilize them on the WAN interface, please use WAN
IP Alias. You can set up to 32 public IP addresses other than the
current one you are using. Notice that this setting is available for
WAN1 only.
Obtain an IP address automatically – Click this button to obtain
the IP address automatically if you want to use Dynamic IP mode.
Router Name: Type in the router name provided by ISP.
Domain Name: Type in the domain name that you have assigned.
Specify an IP address – Click this radio button to specify some
data if you want to use Static IP mode.
IP Address: Type the IP address.
Subnet Mask: Type the subnet mask.
Gateway IP Address: Type the gateway IP address.
Default MAC Address : Click this radio button to use default MAC
address for the router.
Specify a MAC Address: Some Cable service providers specify a
specific MAC address for access authentication. In such cases you
need to click the Specify a MAC Address and enter the MAC
address in the MAC Address field.
Type in the primary IP address for the router if you want to use
Static IP mode. If necessary, type in secondary IP address for
necessity in the future.
P
T
P
/
L
2
T
P
P
T
P
/
L
2
T
P
29
Vigor2955 User's Guide
Advertisement
Table of Contents
