Remote Control - DLS AMPLIFIER ONE Owner's Manual

Features
Use the remote control to enter the following Features: Surround Mode and Tape Loop
Surround Mode
Tape Loop
Remote control R4U
The same remote is used for both AMPLIFIER ONE and CD ONE.
The functions used to control the amplifier are bold in the text below.
1. AMP
2. CD
3. DIM AMP
4. DIM CD
5. TAPE LOOP
6. RANDOM
7. SURR
8. TIME
9. DISP EDIT
10. MUTE AMP
11. SOURCE
12. VOL
13.
t t
14.
15.
16.
t t t t
17.
18.
t t t t
tt tt t
19.
20.
t t t t tt t t t t
21. REPEAT
22. CD/SACD
6
To bypass the preamplifier section of the AMPLIFIER ONE,
press the "SURR" button on your remote control for 1 second.
SURR SURR will be displayed next to your currently selected input. SURR will be displayed next to your currently selected input.
NOTE: In this mode Line 4 (TAPE) will be directly connected to
the power amplifier bypassing the internal preamplifier circuits.
WARNING: Do not press Surround Mode if you don't use an
external Surround preamplifier.
If you want to use any external Line Level equipment (such
as Surround processor, Digital Room correction unit or similar
equipment) connect as follow: TAPE OUT to external equipment
Input, and Output from the equipment to TAPE IN at the AMP-
LIFIER ONE. By pressing "Tape Loop" on the remote control,
you now loop the signal through the external equipment.
Changes the AMPLIFIER ONE between ON and Standby mode
Changes the CD ONE between ON and Standby mode
Dims the display at AMPLIFIER ONE in three steps and off
Dims the display at the CD front panel in three steps
Loop signal to external equipment
Random play for Compact disc
Press the button for 1 second to entry "SURROUND" mode
Displays track and elapsed time of track or CD
Editing display on amplifier
Mute control button for the amplifier, mutes to "0" Output level Mute control button for the amplifier, mutes to "0" Output level Mute control button for the amplifier, mutes to "0" Output level
Use - or + to change the input source
Output level + / -
Stop playing disc
Play disc
Open / Close CD drawer
Pauses playing disc
Restart current track, or step to previous track
Step to next track
Reverse Scan
Forward Scan
Repeat track (press once), Repeat Disc (press twice)
To cancel press until Repeat Off shows in Display
In Stop-mode: Changes between SACD-STEREO