Congratulations; Unpacking; Quick Setup Guide - DLS AMPLIFIER ONE Owner's Manual

Congratulations!

Thank you for selecting the DLS AMPLIFIER ONE as a part of your music system.
When we designed this amplifier, we decided to enter with "A Big Bang". This amplifier has a high-
tech interior, but a "no-nonsense", user-friendly exterior.
The amplifier has been designed and assembled by highly skilled DLS craftsmen to offer state-of-
the-art high-end performance in a luxury elegant package.
We have spared no effort to ensure that it is one of the finest two-channel integrated amplifiers
available in its class. We hope you enjoy listening to the AMPLIFIER ONE as much as the pride
we have taken in creating this audio product.
Before setting up your AMPLIFIER ONE, please read this manual thoroughly
to assure yourself with its features.

Unpacking

The DLS AMPLIFIER ONE should be removed from its box with care.
The following accessories should be included inside the box together with your AMPLIFIER ONE:
1. R4U remote control
2. Two "AAA" batteries
AC power cable
3.
4. This owner's manual
As soon as the amplifier is safely removed from it's box, perform a thorough physical inspection
and report any damage to your dealer immediately.
nal packaging material, storing it in a safe, dry place in the event that you need to transport the
amplifier.
Please write the serial number of the AMPLIFIER ONE (on rear panel) in the space provided
below for future reference:
Serial No:_______________________________________________
Date of purchase:_________________________________________
Dealers name:___________________________________________
Quick setup
- Carefully unpack your AMPLIFIER ONE.
- Connect your input source to the amplifier.
- Connect your loudspeakers to outputs connectors properly
- Connect the AC cable to the amplifier and to an AC wall outlet. Make sure you connect to
the proper voltage marked on your amplifier.
- Set the main switch (at the back panel on the amplifier) to "ON".
- Wait during the Warming-up period is ready (approx. 12-15sek.). Warming-up Warming-up period is ready (approx. 12-15sek.).
- Push the "Standby" button (on the front pa nel) to "ON".
- Choose the input source at the left side on the front panel, with the rotary source control.
NOTE: The amplifier need a "BURN-IN" period for approx. 400 hours. (for more information
read the "Introduction" on page 2).
immediately We suggest that you keep all of the origi- immediately.
.
1