Operation - Dimplex BF9000 Owner's Manual

Operation

Figure 5
A. Main ON/OFF Switch
The switch has two on positions
marked. The " -- " position is
for manual operation. In this
position the built-in remote control
is by-passed. The " = " position
is for operating the unit with the
provided remote control. When
in remote control (" = ") position
the unit is operated with the ON
and OFF buttons of the remote
control.
When the switch is in the center
"o" position the unit is off.
B. Heater ON Switch
The Heat on/oFF switch
supplies power to the heater
fan and the heater element.
When the switch is in the on
12
C
position the heater operates if the
thermostat calls for heat.
C. Heater Thermostat Control
To adjust the temperature to your
individual requirements, turn the
thermostat control clockwise all
the way to turn on the heater.
When the room reaches the
desired temperature, turn
the thermostat knob counter-
clockwise until you hear a click.
Leave in this position to maintain
the room temperature at this
setting. For additional heat, turn
clockwise until you hear the click
again and the heater will turn on.
A
B
www.dimplex.com