Operation - Dimplex DFP15-1134NG Owner's Manual

Operation

Figure 2
C
A - Three Position On/Off
Switch
The power switch has two (2)
On positions marked with " I "
and " II ". The " I " position is for
manual operation. In this position
the built-in remote control is
bypassed.
The " II " position is for operating
the unit with the provided remote
control. When in " II " position
the unit is operated with the ON
and OFF buttons of the remote
control.
When the switch is in the center ("
O ") position the unit is off.
B - Low Heat On/Off Switch
The Low Heat on/off switch
supplies power to the heater fan
and the heater element. When the
switch is in the on position the
heater operates on LoW.
C - High Heat Switch
The High Heat on/off switch
8
B A
Figure 3
ON
Button
OFF
Button
Battery
supplies power to the heater fan
and the heater element, when the
switch is in the on position the
heater operates on HIGH. The
B - Low Heat on/off switch must
also be in the ON position for the
high heat setting to operate.
CAUTION:
continuously cuts out, unplug the
unit and call customer service at
1-800-DImPLEX.
Remote Control (Figure 3)
The fireplace is supplied with an
integrated on/off remote control,
that is factory syncronized with
the firebox.
To operate, push the on button
to turn fireplace on, push the oFF
Battery
Cover
If the unit
www.dimplex.com