Volvo S40 Owner's Manual page 253

Hide thumbs Also See for S40:
Table of Contents

Advertisement

10 Infotainment system
Bluetooth handsfree*
Alternative 2 - via the phone's menu system
1. Activate the handsfree function with
10
PHONE. If there is a phone connected,
disconnect the connected phone.
2. Search with the phone's Bluetooth
the mobile phone's manual.
3. Select
My Car
in the list of units detected
in your mobile phone.
4. Enter the PIN code '1234' into the mobile
phone when prompted for the PIN code.
5. Select to connect to
mobile phone.
The mobile phone is registered and connected
automatically to the audio system while the text
Synchronising
is shown in the display. For
more information on how mobile phones are
registered, see page 253.
When the connection is established the symbol
is shown and the mobile phone's
TM
Bluetooth
name is shown in the display. Now
the mobile phone can be controlled from the
audio system.
1
Applies to Keyless Drive.
*
252
Option/accessory, for more information, see Introduction.
To call
1. Make sure that the text
at the top of the display and that the
symbol is visible.
2. Dial the number or use the phone book,
TM
, see
see page 254.
3. Press ENTER.
The call is interrupted with EXIT.
Disconnecting the mobile phone
Automatic disconnection takes place if the
My Car
from the
mobile phone moves out of the audio system's
range. For more information on connection,
see page 253.
Manual disconnection takes place by deacti-
vating the handsfree function with one long
press on PHONE. The handsfree function is
also deactivated when the engine is switched
off or when a door is opened
When the mobile phone has been discon-
nected an ongoing call can be continued with
the mobile phone's built-in microphone and
speaker.
NOTE
PHONE
is shown
Some mobile phones require that the
changeover from handsfree is confirmed
from the phone's keypad.
Making and receiving calls
Incoming call
Calls are accepted with ENTER even if the
audio system is in CD or FM mode for example.
Refuse or end with EXIT.
Auto answer
The automatic answer function means that
calls are accepted automatically. Activate/
deactivate under
settings
answer.
1
.
In-call menu
Press MENU or ENTER during an ongoing call
to access the following functions:
Microphone muted
microphone is muted.
Transfer call to mobile
ferred to the mobile phone.
Phone menu
Phone
Call options
Automatic
- audio system
- the call is trans-

Advertisement

Table of Contents
loading

Table of Contents