Volvo S40 Owner's Manual page 236

5. Select the desired programme types or
Clear all PTY...
Search PTY
This function searches the entire wavelength
for the selected programme type.
1. Activate PTY.
2. Press MENU and then ENTER.
3. Scroll to
PTY and press ENTER.
4. Scroll to Search PTY and press ENTER.
If the radio finds any of the selected pro-
gramme types, then > appears on the display.
Press the navigation button to continue
searching for another broadcast of the
selected programme types.
Display of programme type
The programme type of the current station can
be shown on the display.
NOTE
Not all radio stations support this function.
Activating/deactivating display
1. Press MENU and then ENTER.
2. Scroll to PTY and press ENTER.
1 Factory sett.
3. Scroll to Show PTY
and press ENTER.
Radio text
Some RDS stations transmit information on
programme content, artists, etc. This informa-
tion can be shown on the display.
Activating/deactivating radio text
1. Press MENU and then ENTER.
2. Scroll to Radio text
and press ENTER.
Automatic frequency update – AF
The AF function selects one of the strongest
transmitters for a set station. The radio may
sometimes need to search through the entire
FM wavelength to find a strong transmitter. If
this occurs, the radio mutes and
Press EXIT to cancel. appears in the display.
Activating/deactivating AF
1. Press MENU and then ENTER.
2. Scroll to Advanced radio settings...
press ENTER.
3. Scroll to AF
and press ENTER.
10 Infotainment system
Regional radio programmes – REG
This function causes the radio to con-
tinue with a regional transmitter even
if its signal strength is low.
Regional
is active. The regional function is normally
deactivated.
Activating/deactivating REG
1. Press MENU and then ENTER.
2. Scroll to Advanced radio settings...
press ENTER.
3. Scroll to Regional
Enhanced Other Networks – EON
The EON function is especially useful in urban
PI Seek
areas with many regional radio stations. It
allows the distance between the car and the
radio station transmitter to determine when
programme functions should interrupt the cur-
rent audio source.
and
•
Local
– interrupts only if the radio station
transmitter is close.
• 1
Distant
– interrupts if the station trans-
mitter is far away, even if there is a lot of
static.
•
Off – no interruption for programmes from
other transmitters.
Radio functions
indicates that the function
and
and press ENTER.
235
10