Volvo S40 Owner's Manual page 213

09 Maintenance and service
Replacing bulbs
09
5. Refit the bulb holder. It can only be refitted
in one position.
6. Refit the cover, located above the lamp
housing, by turning it clockwise.
7. Refit the lamp housing, see page 210.
Position/parking lamps
1. Undo the lamp housing, see page 210.
2. Undo the cover, located above the lamp
housing, by turning it anticlockwise.
3. Withdraw the bulb holder and change the
bulb.
*
212
Option/accessory, for more information, see Introduction.
4. Press the bulb holder back on. A "click" is
heard when the bulb holder is fitted cor-
rectly.
5. Refit the cover, located above the lamp
housing, by turning it clockwise.
6. Refit the lamp housing, see page 210.
NOTE
A lamp equipped with "Active Bending
Lights* has a position lamp (LED) which can-
not be replaced.
Direction indicators
1. Undo the lamp housing, see page 210.
2. Twist the bulb holder anticlockwise and
remove it.
3. To remove the bulb from the bulb holder,
press the bulb in and turn it anticlockwise.
4. Fit a new bulb and refit the bulb holder into
the lamp housing.
5. Refit the lamp housing, see page 210.
Side marker lamps
1. Undo the lamp housing, see page 210.
2. Twist the bulb holder anticlockwise and
withdraw it. Replace the bulb.
3. Refit the bulb holder. It can only fit in one
position.